Worm gears are usually used when large rate reductions are needed. The reduction ratio depends upon the number of starts of the worm and number of tooth on the worm equipment. But worm gears have sliding contact which is quiet but will produce heat and have relatively low transmission performance.
As for the materials for production, in general, worm is constructed of hard metal while the worm gear is made from relatively soft metal such as for example aluminum bronze. This is because the number of teeth on the worm equipment is relatively high compared to worm using its number of starts being generally 1 to 4, by reducing the worm equipment hardness, the friction on the worm the teeth is reduced. Another characteristic of worm manufacturing is the need of specialized machine for gear reducing and tooth grinding of worms. The worm equipment, on the other hand, may be made with the hobbing machine used for spur gears. But due to the different tooth shape, it is not possible to cut many gears at once by stacking the gear blanks as can be carried out with spur gears.
The applications for worm gears include gear boxes, angling pole reels, guitar string tuning pegs, and in which a delicate acceleration adjustment by utilizing a huge speed reduction is needed. While you can rotate the worm gear by worm, it is normally not possible to rotate worm by using the worm gear. That is called the personal locking feature. The self locking feature cannot continually be assured and a separate method is preferred for true positive reverse prevention.
Also there exists duplex worm gear type. When working with these, it is possible to change backlash, as when one’s teeth put on necessitates backlash adjustment, without needing a change in the guts distance. There aren’t too many manufacturers who can create this type of worm.
The worm gear is additionally called worm wheel in China.
A worm gear is a gear consisting of a shaft with a spiral thread that engages with and drives a toothed wheel. Worm gears are a vintage style of gear, and a edition of one of the six simple machines. Fundamentally, a worm gear can be a screw butted against what appears like a typical spur gear with slightly angled and curved tooth.
It changes the rotational motion by 90 degrees, and the plane of motion also changes due to the position of the worm upon the worm wheel (or simply “the wheel”). They are usually comprised of a steel worm and a brass wheel.
Figure 1. Worm equipment. Most worms (but not all) are at the bottom.
How Worm Gears Work
An electric motor or engine applies rotational power via to the worm. The worm rotates against the wheel, and the screw encounter pushes on the teeth of the wheel. The wheel is pushed against the load.
Worm Gear Uses
There are a few reasons why you might select a worm gear more than a standard gear.
The first one may be the high reduction ratio. A worm equipment can have a massive reduction ratio with small effort – all one should do is usually add circumference to the wheel. Therefore you can utilize it to either significantly increase torque or help reduce speed. It’ll typically consider multiple reductions of a conventional gearset to attain the same reduction level of a single worm gear – which means users of worm gears have got fewer moving parts and fewer areas for failure.
A second reason to employ a worm gear is the inability to reverse the direction of power. Due to the friction between your worm and the wheel, it is virtually not possible for a wheel with drive applied to it to start the worm moving.
On a standard gear, the input and output could be turned independently once enough force is used. This necessitates adding a backstop to a standard gearbox, further raising the complication of the gear set.
YOU WILL WANT TO to Use Worm Gears
There is one especially glaring reason one would not choose a worm gear more than a standard gear: lubrication. The motion between the worm and the wheel gear faces is entirely sliding. There is no rolling element of the tooth contact or interaction. This makes them relatively difficult to lubricate.
The lubricants required are usually high viscosity (ISO 320 and better) and thus are hard to filter, and the lubricants required are usually specialized in what they do, requiring a product to be on-site particularly for that type of equipment.
Worm Gear Lubrication
The main problem with a worm gear is how it transfers power. It really is a boon and a curse simultaneously. The spiral movement allows huge amounts of decrease in a comparatively little bit of space for what is required if a standard helical equipment were used.
This spiral motion also causes a remarkably problematic condition to be the primary mode of power transfer. That is commonly known as sliding friction or sliding use.
With a typical gear set the energy is transferred at the peak load point on the tooth (known as the apex or pitchline), at least in a rolling wear condition. Sliding occurs on either aspect of the apex, but the velocity is relatively low.
With a worm gear, sliding motion may be the only transfer of power. As the worm slides across the tooth of the wheel, it slowly rubs off the lubricant film, until there is no lubricant film left, and for that reason, the worm rubs at the steel of the wheel in a boundary lubrication regime. When the worm surface leaves the wheel surface, it accumulates more lubricant, and starts the procedure over again on the next revolution.
The rolling friction on an average gear tooth requires little in the way of lubricant film to fill in the spaces and separate both components. Because sliding takes place on either side of the gear tooth apex, a somewhat higher viscosity of lubricant than is usually strictly needed for rolling wear must overcome that load. The sliding happens at a comparatively low velocity.
The worm on a worm set gear turns, and while turning, it crushes against the load that’s imposed on the wheel. The only method to avoid the worm from touching the wheel is to get a film thickness large enough never to have the entire tooth surface wiped off before that portion of the worm has gone out of the strain zone.
This scenario requires a special kind of lubricant. Not only will it will have to be a relatively high viscosity lubricant (and the higher the strain or temperature, the higher the viscosity should be), it must have some way to greatly help overcome the sliding condition present.
Read The Right Way to Lubricate Worm Gears to learn more on this topic.
Viscosity is the major element in preventing the worm from touching the wheel in a worm equipment set. While the load and size of gearing determines the required lubricant, an ISO 460 or ISO 680 is fairly common, and an ISO 1000 isn’t unheard of. If you’ve ever tried to filter this range of viscosity, you understand it is problematic because it is likely that none of the filters or pumps you have got on-site will be the correct size or rating to function properly.
Therefore, you would likely have to get a specific pump and filter for this type of unit. A lubricant that viscous requires a slower operating pump to prevent the lubricant from activating the filter bypass. It will also require a large surface area filter to permit the lubricant to circulation through.
Lubricant Types to consider
One lubricant type commonly used with worm gears is mineral-based, compounded equipment oils. There are no additives which can be placed into a lubricant that can make it overcome sliding wear indefinitely, but the organic or synthetic fatty additive mixture in compounded gear oils results in good lubricity, providing an extra way of measuring protection from metal-to-metal contact.
Another lubricant type commonly used with worm gears is mineral-based, commercial extreme pressure (EP) gear oils. There are some problems with this kind of lubricant if you are using a worm equipment with a yellow metallic (brass) component. However, for those who have fairly low operating temps or no yellow metal present on the gear tooth areas, this lubricant works well.
Polyalphaolefin (PAO) gear lubricants work very well in worm equipment applications because they naturally possess good lubricity properties. With a PAO equipment oil, it is necessary to watch the additive bundle, because these can have EP additives. A standard-duty antiwear (AW) fortified gear oil will typically end up being acceptable, but check that the properties are appropriate for most metals.
The writer recommends to closely view the put on metals in oil evaluation testing to make sure that the AW package isn’t so reactive concerning cause significant leaching from the brass. The effect should be much less than what would be noticed with EP even in a worst-case scenario for AW reactivity, nonetheless it can show up in metals assessment. If you want a lubricant that may deal with higher- or lower-than-typical temperatures, the right PAO-based product is likely available.
Polyalkylene glycols (PAG), a fourth kind of lubricant, are getting more common. These lubricants have superb lubricity properties, , nor contain the waxes that trigger low-temperature problems with many mineral lubricants, producing them an excellent low-temperature choice. Caution must be taken when using PAG oils because they’re not compatible with mineral oils, and some seals and paints.
Metallurgy of Worm Gears
The most common worm gears are made with a brass wheel and a steel worm. That is since the brass wheel is normally easier to replace compared to the worm itself. The wheel is manufactured out of brass because it was created to be sacrificial.
When the two surfaces come into contact, the worm is marginally secure from wear since the wheel is softer, and for that reason, the majority of the wear occurs on the wheel. Oil evaluation reports on this kind of unit almost always show some degree of copper and low levels of iron – as a result of the sacrificial wheel.
This brass wheel throws another problem in to the lubrication equation for worm gears. If a sulfur-phosphorous EP gear essential oil is put into the sump of a worm equipment with a brass wheel, and the temperature is certainly high enough, the EP additive will activate. In normal steel gears, this activation creates a thin level of oxidation on the surface that helps to protect the apparatus tooth from shock loads and other extreme mechanical conditions.
On the brass surface however, the activation of the EP additive outcomes in significant corrosion from the sulfur. In a short timeframe, you can shed a substantial portion of the load surface area of the wheel and trigger major damage.
A few of the less common materials found in worm gear pieces include:
Steel worm and steel worm wheel – This app does not have the EP complications of brass gearing, but there is no room for error included in a gearbox like this. Repairs on worm gear sets with this combination of metal are typically more costly and additional time eating than with a brass/steel worm gear set. This is because the material transfer connected with failure makes both the worm and the wheel unusable in the rebuild.
Brass worm and brass worm wheel – This software is most likely within moderate to light load situations because the brass can only keep up to a lesser quantity of load. Lubricant selection on this metal mixture is flexible due to the lighter load, but one must still consider the additive restrictions regarding EP because of the yellow metal.
Plastic on metal, upon plastic, and other comparable combinations – This is typically within relatively light load applications, such as robotics and auto components. The lubricant selection depends on the plastic used, because many plastic varieties react to the hydrocarbons in regular lubricant, and thus will demand silicon-based or other nonreactive lubricants.
Although a worm gear will always have a couple of complications compared to a standard gear set, it can simply be an effective and reliable piece of equipment. With a little focus on set up and lubricant selection, worm gears can provide reliable service and also any other kind of gear set.
A worm drive is one simple worm gear set system in which a worm meshes with a worm equipment. Even it is simple, there are two important elements: worm and worm equipment. (Also, they are called the worm and worm wheel) The worm and worm wheel is important motion control element providing large velocity reductions. It can reduce the rotational acceleration or boost the torque result. The worm drive motion advantage is that they can transfer movement in right angle. In addition, it has an interesting home: the worm or worm shaft can easily turn the apparatus, but the gear can not switch the worm. This worm drive self-locking feature let the worm gear has a brake function in conveyor systems or lifting systems.
An Launch to Worm Gearbox
The most crucial applications of worm gears can be used in worm gear box. A worm gearbox is called a worm reduction gearbox, worm gear reducer or a worm drive gearbox. It consists of worm gears, shafts, bearings, and box frames.
The worm gear, shafts, bearings load are supported by the box shell. Therefore, the gearbox housing must have sufficient hardness. Or else, it will result in lower transmitting quality. As the worm gearbox comes with a durable, transmission ratio, small size, self-locking capability, and simple framework, it is often used across an array of industries: Rotary table or turntable, material dosing systems, auto feed machinery, stacking machine, belt conveyors, farm selecting lorries and more automation market.
How to Select High Efficient Worm Gearbox?
The worm gear manufacturing process can be relatively simple. However, there is a low transmission efficiency problem if you don’t know the how to choose the worm gearbox. 3 basic point to choose high worm gear efficiency that you ought to know:
1) Helix angle. The worm gear drive efficiency mostly depend on the helix position of the worm. Usually, multiple thread worms and gears is usually more efficient than single thread worms. Proper thread worms can increase effectiveness.
2) Lubrication. To choose a brand lubricating essential oil is an essential factor to boost worm gearbox performance. As the correct lubrication can reduce worm gear action friction and warmth.
3) Materials selection and Gear Production Technology. For worm shaft, the material should be hardened steel. The worm gear material ought to be aluminium bronze. By reducing the worm gear hardness, the friction on the worm tooth is decreased. In worm manufacturing, to use the specialized machine for gear reducing and tooth grinding of worms also can increase worm gearbox effectiveness.
From a huge transmission gearbox capacity to a straight small worm gearbox load, you can choose one from a wide variety of worm reducer that precisely fits your application requirements.
Worm Gear Package Assembly：
1) You may complete the installation in six different ways.
2) The installation should be solid and reliable.
3) Be sure to examine the connection between the electric motor and the worm gear reducer.
4) You must use flexible cables and wiring for a manual set up.
With the help of the most advanced science and drive technology, we’ve developed several unique “square package” designed from high-quality aluminium die casting with a lovely appearance. The modular worm gearbox style series: worm drive gearbox, parallel shaft gearbox, bevel helical gearbox, spiral bevel gearbox, coaxial gearbox, correct angle gearbox. An NMRV series gearbox is usually a typical worm gearbox with a bronze worm gear and a worm. Our Helical gearbox product line consists of four universal series (R/S/K/F) and a step-less speed variation UDL series. Their structure and function act like an NMRV worm gearbox.
Worm gears are constructed of a worm and a equipment (sometimes referred to as a worm wheel), with non-parallel, nonintersecting shafts oriented 90 degrees to each other. The worm can be analogous to a screw with a V-type thread, and the apparatus is certainly analogous to a spur equipment. The worm is typically the traveling component, with the worm’s thread advancing the teeth of the gear.
Such as a ball screw, the worm in a worm gear might have a single start or multiple starts – meaning that there are multiple threads, or helicies, on the worm. For a single-start worm, each complete turn (360 degrees) of the worm increases the gear by one tooth. Therefore a gear with 24 teeth will provide a gear reduction of 24:1. For a multi-start worm, the apparatus reduction equals the number of teeth on the gear, divided by the number of starts on the worm. (That is different from almost every other types of gears, where in fact the gear reduction is certainly a function of the diameters of both components.)
The worm in a worm gear assembly can have one start (thread) or multiple starts.
Image credit: Kohara Gear Market Company, Ltd.
The meshing of the worm and the apparatus is a mixture of sliding and rolling actions, but sliding contact dominates at high reduction ratios. This sliding actions causes friction and temperature, which limits the performance of worm gears to 30 to 50 percent. To be able to minimize friction (and for that reason, high temperature), the worm and gear are made from dissimilar metals – for example, the worm may be made of hardened metal and the gear manufactured from bronze or aluminum.
Although the sliding contact reduces efficiency, it provides extremely quiet operation. (The usage of dissimilar metals for the worm and gear also contributes to quiet procedure.) This makes worm gears ideal for use where noise should be minimized, such as in elevators. Furthermore, the use of a softer material for the apparatus means that it can absorb shock loads, like those skilled in weighty equipment or crushing devices.
The primary benefit of worm gears is their capability to provide high reduction ratios and correspondingly high torque multiplication. They may also be utilized as velocity reducers in low- to medium-quickness applications. And, because their reduction ratio is founded on the number of gear teeth alone, they are more compact than other types of gears. Like fine-pitch business lead screws, worm gears are typically self-locking, which makes them ideal for hoisting and lifting applications.
A worm gear reducer is one kind of reduction gear container which includes a worm pinion input, an output worm equipment, and features a right angle output orientation. This kind of reduction gear package is generally used to have a rated motor quickness and create a low speed output with higher torque worth based on the decrease ratio. They often can solve space-saving problems since the worm equipment reducer is one of the sleekest decrease gearboxes available due to the little diameter of its output gear.
worm gear reducerWorm equipment reducers are also a popular type of rate reducer because they offer the greatest speed decrease in the smallest package. With a high ratio of speed decrease and high torque output multiplier, it’s unsurprising that many power transmission systems make use of a worm gear reducer. Some of the most typical applications for worm gears are available in tuning instruments, medical screening equipment, elevators, security gates, and conveyor belts.
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are manufactured with rugged compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that is also compact, non-corrosive, and nonmetallic.
Our worm equipment reducers offer an option of a solid or hollow result shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, however, can endure shock loading much better than other decrease gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Low friction coefficient on the gearing for high efficiency.
Powered by long-enduring worm gears.
Minimal speed fluctuation with low noise and low vibration.
Lightweight and compact in accordance with its high load capacity.
Compact design is among the key terms of the standard gearboxes of the BJ-Series. Further optimisation can be achieved by using adapted gearboxes or unique gearboxes.
Our worm gearboxes and actuators are extremely quiet. This is because of the very smooth operating of the worm gear combined with the use of cast iron and high precision on component manufacturing and assembly. In connection with our precision gearboxes, we take extra care of any sound which can be interpreted as a murmur from the gear. Therefore the general noise level of our gearbox is usually reduced to an absolute minimum.
On the worm gearbox the input shaft and output shaft are perpendicular to one another. This often proves to be a decisive advantage producing the incorporation of the gearbox substantially simpler and more compact.The worm gearbox is an angle gear. This is an advantage for incorporation into constructions.
Solid bearings in solid housing
The output shaft of the BJ worm gearbox is very firmly embedded in the gear house and is well suited for direct suspension for wheels, movable arms and other parts rather than having to create a separate suspension.
For larger gear ratios, BJ-Gear’s worm gearboxes will provide a self-locking effect, which in lots of situations can be used as brake or as extra protection. Also spindle gearboxes with a trapezoidal spindle are self-locking, making them perfect for an array of solutions.
For those whose enthusiasm is worm wheel gearbox, we have the responses.