Our standard 700 Series – the heart of EP rate reducer product line – has been serving industry reliably for over 10 years. Its proven modular design has set the market standard for performance and is the most imitated merchandise in the current worm gear velocity reducer marketplace. But why accept a knock-off when you can have the initial – from EP.
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure confident, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, and also greater precision during worm and gear alignment.
EP 700 Series high-strength bronze worm equipment is straddle mounted around heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of large torque and overhung loads.
Pipe plugs allow convenient fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
EP worm gearboxes possess earned a reputation to be an industry benchmark worldwide. Our success came from our relentless travel for quality with state-of-the-art technology, all while offering worm gearboxes happen to be affordable prices. High flexibility accorded through a wide choice of mounting options, shaft configurations and engine interfaces, would make the EP worm gearbox the default choice for the sector. The helical-worm and the double-worm version, with or without the torque limiter, soon add up to the advantage, creating an extremely versatile drive system.
EP Worm gearboxes provide large torque with low rate gear ratio. Being basic and compact in design, these gears can achieve higher gear ratio compared to the helical gears. These worm decrease gears having screw type qualities are similar to helical gears, but its helix angle is typically comparatively bigger) and its own body is generally quite lengthy in the axial direction. The gears in these gearboxes can be correct or left-handed depending upon the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (solitary or double), with torque arm or torque limiter.
Worm reduction gears features
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is definitely shaped such as a screw and the worm wheel is certainly a kind of gear machined to own a tooth profile with the same configuration.
The procedure of a worm gear is comparable with that of a bolt and nut. The principle is equivalent to a nut that is fixed so that it cannot rotate and therefore progresses in the axial path when the bolt is certainly turned.
The look of a worm gear is considered through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Huge reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. For this reason, in a 1 speed decrease gears, the wheel could be manufactured hence that it will be rotated 1/60 (1/120 in unique applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This characteristic makes it possible to layout the turning tranny direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). You’ll be able to modification the rotation direction of the worm wheel by changing the screw direction.
A wide variety of shaft layouts The wide selection of shaft layouts is among the top features of interlocking gears.For instance, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., incorporate for a complete of 14 types (Body 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is usually characteristic because the contact is certainly linear and the relative slide is excellent. In comparison with rolling power transmission, sound and vibration are extremely low. Because of this, this technology is used to drive medical tools, elevators and escalators, etc.
The primary specifications of worm reduction gears
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1～1(at an input of 1800 rpm)
Output torque(N・m) 20～66
Input speed(rpm) 0～1800
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4～30(at an input of 1800 rpm)
Output torque(N・m) 900～3570
Input speed(rpm) 0～1800
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3～255(at an input of 1800 rpm)
Output torque(N・m) 50～56600
Input speed(rpm) 0～1800
Key points when choosing a worm reduction gears
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the manufacturer catalogs and the series and models ought to be selected according to those procedures. Particular care should be taken in essential areas such as selecting the load index, calculating the overhang load and examining the heat rated capability from the manufacturer.
Cautions during use
When utilizing a worm lowering gears, the heat produced during the initial period of use is large and running-in procedure at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently achieving the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to change the lubricating oil and to change the lubricating oil from then on about 1 time each year according to the procedure manual given by the manufacturer.
The Worm Decrease Gear Box is supplied by our company is of high-quality. Our products are created by using premium quality materials and progress technology at our vendors end. They are widely used in a variety of sectors. Our goods are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Frame, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and safe operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
Wormgears of the VF series are actually milestones for the industry worldwide. They succeeded in combining uncompromising top quality with stateoftheart technology amd renown price effectiveness.Absolute flexibility is given by the wide selection of several installation options, shaft configurations and motor interface, all offered as regular. The helicalworm and the doubleworm edition, with or without the torque limiter, also accumulate, creating a highly versatile drive system.
20 degree C TO 80 degree C
The worm reduction gears come in two series: X and H.
The series X, featuring a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) provides great versatility to match a broad selection of applications and provides higher efficiency than the compact range XC, where the emphasis is on space effectiveness.
Series H offers the same features because series X with an added plus: a spur gear pre-stage at the insight end provides higher functionality and a good broader range of ratios than the X series.
Frame sizes 110 and 90 feature a cast-iron housing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is produced from casehardened and hardened alloy metal and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow output shaft comes as standard.
Broad range of options available:
second input, output flange, single or double extension output shaft, torque limiter with through wire, torque arm.