Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to fit, high torque result is required. Great for student based projects including robots and buggies.
The unit has been designed so that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The motor is snap fitted into its cradle to activate the gear and worm.
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for little strolling robots, lifting mechanisms, and various other applications where high torque is certainly desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to some amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, also at suprisingly low voltages. We advise that you use stall-detection sensors, or simply watch your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on small threaded end of the shaft, though it is not particularly intended to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors established new specifications for reliability, effectiveness and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration now and a future proof alternative. The Ever-Power gear engine offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90º steps around the engine frame offering for unparalleled integration opportunities.
Ever-Power gear motors adhere to North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total option for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Complete rated output is offered by the output shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a corner turn, optional dual result, or an inability for the motor to be back driven. The DC correct angle equipment motors are designed for constant and intermittent duty procedure. Our right angle gear reducers were created with a number of mounting plate options, making them well suited for a variety of DC electric motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 worm motor Standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Gear Motors are excellent for applications that require a personal- locking or breaking feature because the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Decrease Ratios
Security Door Locks / Industrial Conveying Systems / Security Gates / Oral Chair / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Products will work with you to design and produce a Worm Gear Electric motor that will optimize the performance of your unique application.
Built to your specific requirements
Motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm engine uses a metal gear box for strength and a high torque output. Because of the special mechanical framework of the worm drive the motor output shaft is usually self locking and will not be rotated.
This part uses a two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and can achieve 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their power in applications where high equipment ratios are essential. Our worm geared motors are consequently optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Our worm geared motors have a high overload capacity
Washdown versions allow simple and efficient cleaning of the drive system.
The NSD tupH sealed surface conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its unique requirements. The EP series worm gear motors could be quickly and effectively adapted to satisfy your needs.
Worm gear systems impress with their high power density and compact design. If required, we are able to also supply them with the impressive nsd tupH surface area treatment.
As well as the basic EP housing, we offer an extensive type of bolt-on parts to customize the product including torque arms, shaft covers and output flanges. These can be very easily field set up, but we will also be pleased to assemble the average person components for you.
Discover more about our modular SI worm geared motors!
Find out more
Clean and Clean: The EP worm equipment unit SMI
SMI worm gear devices feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes this product ideally suited for severe and challenging industries like meals processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units possess on all sides different fixing possibilities and enable an easy assembling for the client.
Various other drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are created in light weight construction out of aluminium die cast. Engine attachment is realised generally by way of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load speed, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 motor (included), most ideal for applications where a simple to fit, high torque output is required, nylon housing and equipment, requires light oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most ideal for applications where a simple to fit, high torque output is required
Ideal for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
The electric motor is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that is, regarding motor without electric, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole electric motor output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a better option when compared to spur gear motor. How come worm gear so particular? Check this wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, because of the better friction involved between the worm and worm-wheel, when usually an individual start (1 spiral) worm can be used. This can be an advantage when it’s desired to remove any likelihood of the output driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor