This standard range of Servo-Worm Reducers are ideal for use in applications that demand powerful, precise positioning and repeatability. They were specifically developed for make use of with state-of-the-art servo motor technology, providing tight integration of the engine to the unit. Angular backlash of significantly less than 1 arc-minutes is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center distance) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide variety of engine couplings and mounting flanges are available for assembly to virtually all servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
Standard applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and digital line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Device and Robotics.
helical-worm servo gearmotors have a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for important installation space.
The helical-worm servo gearmotors were created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors give you exceptional attenuation properties for the procedure of your systems with low degrees of vibration. This is due to the longitudinal software of drive on the insight shaft. This enables torque impulses to be prevented successfully and for maximum results in conditions of running smoothness and noise reduction to be performed.
Both the gear unit, and the synchronous servomotor are based on our modular program. This allows you to have fully individual configuration options for every application. One matter is certain – Our servo gearmotors are genuine specialists for very particular requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a gear in the form of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are metal or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are considerably smaller than other gear reduction boxes. A major benefit of worm equipment reducers can be that they generate an output that is 90° from the input and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox offers right hands threads; to change the path of the result, a left-hand thread worm gearbox is required.
At times a motor’s capability could be limited to the point where it requires gearing. As servo producers develop better motors that can muscle mass applications through more complicated moves and create higher torques and speeds, these motors require gearheads the same to the task.
Have an inquisitiveness concerning the Worm Drive Servo?