This standard selection of Servo-Worm Reducers are ideal for use in applications that demand powerful, precise positioning and repeatability. They were specifically developed for make use of with state-of-the-art servo electric motor technology, providing tight integration of the engine to the unit. Angular backlash of less than 1 arc-minutes is provided standard.

They can be purchased in four sizes (50 mm to 100 mm center distance) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of engine couplings and installation flanges are available for assembly to practically all servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.

Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, worm drive servo china materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque range of 92 Nm to 520 Nm. As angular drives they are specially space-saving and reduce the expenditure for valuable set up space.

The helical-worm servo gearmotors were created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you with exceptional attenuation properties for the operation of your systems with low levels of vibration. This is usually due to the longitudinal application of power on the insight shaft. This allows torque impulses to become prevented efficiently and for optimum results in conditions of running smoothness and noise reduction to be performed.

Both the gear unit, and the synchronous servomotor derive from our modular program. This enables you to have completely individual configuration opportunities for every application. One factor is certain – Our servo gearmotors are real specialists for very particular requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, acceleration reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement in which a equipment in the type of a screw, also called a worm, meshes with a worm gear. These gears are usually created from bronze and the worms are steel or stainless steel.

While worm gears act like a spur gear, the worm gearboxes are significantly smaller than other gear reduction boxes. A main benefit of worm gear reducers can be that they produce an output that is 90° from the input and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox has right hand threads; to improve the path of the output, a left-hand thread worm gearbox is required.
Sometimes a motor’s capability could be limited to the main point where it needs gearing. As servo producers develop better motors that can muscle mass applications through more difficult moves and produce higher torques and speeds, these motors require gearheads equal to the task.