Weld-On Hubs can be purchased in 3 styles to suit the user’s preference for bushing installation types. They will be stocked for apply with:
TB Bushings
QD Bushings
DST Bushings
All MasterDrive Weld-On Hubs are machined from steel.
Weld-On Hubs are generally used in combination with plate type sprockets and conveyor pulleys to provide for more shaft engagement.
Are manufactured to simply accept Taper Lock Bushings. Two designs can be found. Type S and Type W. Type S provides for a shorter duration through the bore, and Type W a far more identified registration flange to aid with positioning and concentricity for welding.
Are manufactured to accept a QD design flanged bushing.

Accepts DST-Dual Split Taper style bushings.
These bushings are keyed to both shaft and hub. The external key provides positive travel without torque on the cap screws. DST bushings enable the highest torque carrying capability.
The nitro weld on hubs are bored to size hubs that can be utilised with weld on sprockets, pulleys and even custom applications. Our hubs are an “X series” hub, this means they’re appropriate for any “x series” sprockets or pulleys. Sprocket X hubs can be found in finished bore, square bore, hex bore, idler and splined bore. Bore sizes range between 1/2″ ID up to 1-1/2″ ID. The Nitro weld on hubs are produced from 1045 CD (frosty drawn) steel and done with a dark oxide coating.
Weld-On Hubs are created from steel, drilled, tapped and taper bored to receive Tapered
Bushings. They are extremely useful for welding into pulleys, plate sprockets, impellers,
agitators and several other devices which Weld On Hubs china should be firmly fastened to the shaft.
Weld-about hubs are made of 1015-1025 steel, drilled, tapped and taperbored to get the taper-lock bushing. They are useful for welding into admirer rotors, pulleys, plate sprockets, etc., which must be firmly installed onto shafting. Four types of hubs are available from stock.
Weld-about hubs are created from low carbon steel once and for all welding compatibility. They are useful for welding into lover rotors, impellers, agitators, etc., which require secure installation to the shaft. A typical type comes in addition to one that is specifically created for use in the long run disc of a conveyor pulley.
Type S Taper-lock – originally made for use in more compact sprockets, now ideal for a great many other lighter-duty applications
Type W/WA Taper-lock – rugged, full-duration size for single-hub, heavy-duty applications
Type F – features a larger flange diameter that can be welded into standard metal tubing to fabricate conveyor pulleys or perhaps process rolls
Type K – smaller sized style, especially useful for two-hub development, such as for example conveyor pulleys Taper-lock bushings
Both are constructed of steel material with rugged, compact designs to support most bushings sizes.
Ever-Power is a trusted dealer of precision weld-on hubs. Weld-on hubs works extremely well for welding to produce “B” or “C” design sprockets and for different applications. Particular dimensional hubs can be found per your specifications on a made-to-buy basis.
Manufactured from Steel to supply a convenient means to secure admirer rotors. Metal pulleys, platewheel sprockets, impellers etc. to a shaft. The Shouldered outer diameter permits easy position. Taper bored to suit taper lock bush sizes 1210-5050.
Chain & Drives inventory the complete range of Weld-On Hubs to check our coupling, pulley and sprockets inventory in short reach and prolonged reach models. They may be employed in assisting the utilization of taper match bushes to melt your devices to a driven shaft.
Taperfit or perhaps QD weld-on hubs will be for make use of in the fabrication of conveyor pulleys, plate sprockets, supporters and impellers. Weld-on hubs are constructed of low carbon steel for good welding compatibility.

Weld-upon hubs are constructed of 1015-1025 steel, drilled, tapped and taperbored to receive the Taperfit bushing. They are of help for welding into admirer rotors, pulleys, plate sprockets, and should be firmly installed onto shafting. Four types of hubs can be found.
Weld on hubs can be found in many different designs such as for example: stock bore, surface finish bore, Q-bushed, taper-bushed, and BM-bushed. These hubs are produced from bar steel and applied for welding to produce “B” style sprockets that include inventory bore, finished bore, together with styles of bushed sprockets. Distinctive hub dimensions are available per your technical specs on a made-to-order basis.