General Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is built to operate materials managing gear. The reducing motion is achived by the solenoid valve using the decreasing speed managed by an adjustable needle valve. The left and correct functions are outfitted with a dual pilot operated check out valve and cross-over relief valves.
Remark: Please talk to our product sales engineer for the unique pump displacement, motor power or tank capability.
Special Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean the many hydraulic components concerned before installation of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities.N46 hydraulic oil is recommended.
4. This energy unit needs to be mounted horizontal.
five. Check the oil degree during the tank just after the 1st start off with the electrical power unit.
6. Oil shifting is needed after the original a hundred operation hrs, afterwards as soon as every single 3000 hours.