Small Precison Worm Decrease Gearboxes
There are numerous of specifications you will have to consider when making a worm gearbox selection.
First, what is the input and output torque requirements? Next, verify vendor horsepower/torque charts and pick the correct worm gear reducer.
If the size of the gearbox will probably be an important consideration after that check the reducer dimension specifications, not all producers make compact units. In fact, working with the right supplier will help you not merely find the right gear reducer but also prevent some of the most typical mistakes in reducer selection. We provide a free guide to assist you find the appropriate supplier to utilize.
For low and fractional horsepower software we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output are the major differences between both of these models. Both feature either a hollow or solid result shaft. Both models are compact and offer users a wide selection of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or project is vital to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle gear motor is so versatile it could work just about anywhere.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built unique, high precision mini gearboxes that cannot be found anywhere else. Our miniature gearboxes can be found in many configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that were created and created to meet your specific specifications.
Contact us for the mini gearbox your application requires, or ask for a quote upon a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, swiftness reducers, gear drives, and gearmotors. All conditions can be used more or less interchangeably. Please note that the links for our little gear drives include details on the full range of body sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel box miniature equipment drives are app rated for the the best possible balance of overall performance and cost. Torque could be balanced to meet your RPM and operating life requirements. Light-weight with low backlash efficiency (less than 1°, with choice of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They offer an output shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single input shaft that protrudes from reverse sides of the casing; output can be a keyed bore. Standard single- and double-end shafts are available and given keys and retainer rings. An array of gear ratios and insight sizes are available to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and permanent lubrication. They offer two insight shafts on opposing sides of the framework, with two result shafts perpendicular to the insight shafts. Our mini 4 shaft worm gear drives deliver high efficiency performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes create an output at 90° from the input. They deliver superior performance in a wide variety applications and are built with small footprints, making them perfect for operations where space is bound. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. small worm gearbox Aluminum housings and stainless gears and shafts make these inline spur gearboxes tough and corrosion resistant, for your the majority of demanding applications.
Result torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm gear reducers deliver superior performance with high efficiency, and feature rugged building for challenging power transfer operations. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce customized micro gearboxes in virtually any configuration your application requires, with output torque amounts as high as 900Nm. We are able to work from your own gearbox designs, reverse engineer an existing unit, or help you develop an all-new design that delivers the performance you need. Request a quote on a custom miniature gearbox or e mail us to discuss your unique requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and special ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive crucial and retainer rings can be supplied to your specs for just about any of our hollow bore miniature gearboxes. We offer a basic selection of single ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We provide a broad collection of misalignment shaft couplings in ” and metric bore sizes. In . and metric precision surface shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox specialists. All of our micro gear drive models deliver superior performance in a little footprint, and are durable enough for challenging function environments. E mail us to find out more about our mini gearboxes, or demand a quote on a custom made model that is tailored to your needs.
Additional benefits of worm drive gearboxes include: