Right Angle Miter Gearbox Standard Features
Dimensions: right angle miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft may be used as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened metal ball bearings, permanent lubrication
Mounting: Three shaft mounting positions provide versatility in application
Versatile: 3 shaft connections are provided for versatility in application
RAB-1 may be operated CW, CCW or Back again driven
RAB-1 is rated in 1/3 HP in 1800 RPM. Maximum quickness is 3000 RPM
Benefits and COST BENEFITS
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless shaft (Please specify series stainless required)
Longer shafts lengths upon input and output
Right Angle Drives Made out of Advanced Quality Construction
Ever-Power 2-Way Right Position Gearboxes transmit power with noiseless, dependable spiral bevel gears. These superior bevel gearmotors feature hardened spiral bevel gears and non-magnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and show multiple mounting options. The fully enclosed design guarantees the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Right Angle 2-Method Gearboxes are made for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several unique types of shafts as well, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in a huge selection of applications. Any use that demands the dependable transfer of quickness or power, you could find a two-method gearbox bearing the Ever-Power brand. The small design of Ever-Power Two-Way Right-Angle Gearboxes makes them well suited for applications such as:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, offering the most reliable and reliable transfer of power on the market. Our company is known for its innovative styles and producing high-quality motion control solutions made for engineered performance and durability. We offer a range of gearbox designs and a broad selection of versatile shaft couplings to provide you with a finish solutions for your mechanical and power tranny applications.
Right Angle Gearbox
Correct angle gearboxes are characterized by the fact that the drive shaft and the result shaft are organized at an angle of 90 degrees. According to the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Right angle gearboxes are realized with different types of gear teeth or a combination of different gearing types. The most popular single-stage gearbox types are bevel and worm.
Due to the high single stage ratios and the reduced efficiency level, worm gears can perform a self-locking effect. With worm gears it is also possible to have a hollow shaft as the drive shaft.
Bevel gearboxes come with various kinds of gearing. Bevel gearboxes with intersecting axes are realized using bevel gearing with directly, helical or spiral tooth. Hypoid gearboxes have helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with which the bevel gear stage can be realized is bigger with hypoid gearboxes than with the classical bevel equipment teeth.
Bevel gearboxes can also be combined with other gearbox types. A frequent app in this respect is the mixture with a planetary gearbox, whereby the planetary gearbox could be connected upstream or downstream. This outcomes in a wide range of overall multiplication elements and wide range of uses in lots of industrial applications.
The efficiency level of bevel gearboxes is typically lower than that of coaxial spur gearboxes, particularly in comparison to planetary gearboxes. This is because the bevel equipment stage generates a high degree of axial power and radial drive, which needs to be absorbed by appropriate bearings. This increases the power loss, which is particularly significant in the drive stage of the gearbox.
The working noise and the transmittable torques of classic bevel gearboxes are also less than with single spur gear teeth. Hypoid gearboxes, on the other hand, are incredibly noisy and will transmit large amounts of torque, but a great deal of bearing load occurs in the bevel equipment stage of the gearboxes.
In summarizing, a right angle gearbox is often used when the quantity of installation space in the application form is bound, or an angular arrangement between the drive and the output is required by the application. They are also used in situations where the input shaft needs to be hollow in order to business lead through lines or make use of clamping sets.
The advantages of right angle gearboxes:
Use when set up space is limited
Can be combined with other types of gearbox
Quiet and high amount of torque when using hypoid gearboxes
Version with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower performance level than planetary gearbox
Reduce torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is more popular and is used worldwide. The Ever-Power provides manual or power tranny of rotary movement in a COMPACT, standardized right angle unit.
Our standard type of bevel gearboxes are available from stock in both an In . and Metric Series, single or dual result shafts, 1:1 or 2 2:1 ratios, and grease lubricated for life and also have an operating temperature range of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units employ totally enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, upon our CNC machining center and then coated with a chemical substance film to safeguard the material, and use flanged ends and side bosses for compact installation in an array of applications.
The shaft materials used for sizes 1, 2 and 3 is #416 stainless steel. On the two 2:1 models, the pinion shaft is definitely carbon steel. For the sizes 4 & 5, the materials is black oxide carbon metal. Shafts can be provided with special extensions (with flats, splines, holes, etc.) and /or specific lengths upon request.
In addition to our standard versions, we will modify our units to meet up your design specifications! Our product sales and engineering departments will be ready to support you with your specific application requirements.
Through the years we’ve received questions about almost every aspect of the gearbox selection process. One of the questions we’ve had several times is, “Exactly what is a right-position gearbox or a right-position drive?” Or, more specifically, “How is definitely a right-angle gearbox or drive different from a swiftness reducer or other styles of gearboxes?”
First, let’s start with some simple terminology. It isn’t uncommon for the terms “gearbox”, “drive” and “quickness reducer” to be utilized interchangeably.
A gearbox is any gadget that uses a gear train to transmit torque/rpm and whatever uses a gear to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear teach that can transmit torque/rpm 90 degrees, to carefully turn a corner
A gear reducer is a system with a gear train that may reduce rpm output. Due to decreasing rpm is raising torque at the same ratio speed is reduced.
A gear box can also be a speed increaser
The type of gear used in the apparatus box defines it as a right angle or an inline drive.
A worm gear drive is a right-angle drive as is a bevel gear
A spur gear drive is inline
A helical equipment is inline but may also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in the direction of the shaft. It can be a 1 to at least one 1 ratio or a multiple of just one 1 such as 2:1 or 15:1. If the ratio is 1:1 it is a right-position drive. If the ratio is greater than 1:1 it is a right-angle acceleration reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hand rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy metal helical gears for powerful
Built-in 5 sizes with 3 types of result shaft : hollow, projecting or double-extended. Moreover, yet another output shaft can be installed opposing to the insight shaft.
Three input types are available : with projecting input shaft, with pre-manufactured motor coupling (bell and joint) and pre-engineered Small motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined upon all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all internal components.
The mechanism of these gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of high quality bearings on all the axis ensures extended life to the gearbox and allows high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right Angle Miter Gearbox Standard Features