Materials Handling Energy UNIT 1
Common Description
This power unit is made for your fork lift field, consisting of hugely productive gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down movement are controlled through the lever of your manual release valve, which can be equipped with an electrical switch to activate the motor. The lowing velocity is managed through the pressure compensated flow control valve.
Specific Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned prior to set up of the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities, N46 hydraulic oil is advised .
four. Oil modifying is required immediately after the first one hundred operation hrs, afterwards after each and every 3000 hrs.
five. The energy unit proven is made to be mounted horizontally.

Material Handling Energy UNIT two
Basic Description
This energy unit features power up gravity down circuit. Activate the commence solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve using the decreasing speed managed through the pressure compensated flow handle valve. Goods of this series might be widely utilized in the industry of logistic units such as fork lift, mini lift table, etc.
Special Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic components concerned just before mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and cost-free of impurities, N46 hydraulic oil is encouraged .
4. Oil changing is needed soon after the preliminary one hundred operation hrs,afterwards the moment every single 3000 hours.
5. The power unit ought to be mounted horizontally.