December 18, 2020

High-end form of the higher power series
The DID HI-PWR-SHK roller chains have thicker hyperlink plates than HI-PWR-S roller chains, and therefore are the highest in tensile power and allowable load between general application chains, hence getting ideal for very low speed heavy duty transmission.
Recommended makes use of
?The HI-PWR-SHK roller chains are 25 % larger in tensile power and 50 percent greater in maximum allowable load compared to the common roller chains, but considering that their bodyweight is heavier, driving functionality declines at higher speed. So, they may be ideal for heavy duty at low pace applications.

Multilevel parking machines, pipe benders, building machines, and so on.
Choice of chains
Decide on a appropriate HI-PWR-SHK type chain based upon “Low-speed selection”
HI-PWR-SHK series is obtainable in simplex.
Normal sprockets for multiplex chains are unable to be applied.
Connecting backlinks and offset back links
The most beneficial characteristic on the HI-PWR-SHK roller chains is higher maximum allowable load. For that reason, interference-fitted connecting links (H connecting hyperlinks) with tiny strength degradation are utilised.
The connecting plate and also the connecting pins are connected with spring pins. The tensile power of an H connecting hyperlink is equivalent to that on the chain, but the allowable load is relatively decrease than that from the chain.
HI-PWR-S variety roller chains do not have any offset link. Use an even number of hyperlinks.
In no way make the holes with the connecting plate larger and never make the pins thinner to facilitate the perform for fitting the pins in to the connecting plate, given that otherwise the fatigue power will probably be lowered.