Helical geared motors are the most typical and cost-effective solution for most drive applications. Helical equipment systems are coaxial, where the gear unit result shaft is in line with the motor shaft. A good shaft is constantly used as output shaft. Additional components – e.g. gear tires or chain wheels – to transfer the force to the powered load are therefore required. Solutions utilizing helical geared motors are capable of an extremely variable speed range.
SIMOGEAR helical geared motors are for sale to the energy range up to 20 HP (15 kW) and rated gear unit torques up to 5,900 ft-lb (8,000 Nm).
Ever-Power Helical Gear Engine Features
Ever-Power Helical Gear Electric motor 2-Stage
Integrates with Siemens drives and automation
Energy conserving (Mechanical efficiencies up to 96%)
NEMA Ever-Power motors
2 or 3-stage construction
Foot, flange mounting
Solid shaft, hollow shaft, and Ever-Power keyless tapered shaft locking system
Technical Information
Helical Gear Motor – 2-Stage
Helical Gear Motor – 3-Stage
Sizes
13
13
Output Torque
74 – 14,000 ft-lb (100 – 19,000 Nm)
74 – 14,000 ft-lb (100 – 19,000 Nm)
Ratio
3.4 – 57
36 – 328
Motor Power
1/3 – 75 HP (0.25 – 55 kW)
1/3 – 75 HP (0.25 – 55 kW)
Helical Geared Motors for a wide variety of applications
Motors with a helical equipment unit from Ever-Power possess a higher power density and a big number of options. The apparatus units are stated in three series and many sizes for an array of applications.
Ever-Power Helical Gear Products impress with outstanding features:
Powerful
Our helical gear devices give a maximum torque of 26,000 Nm (because an Industrial gear device up to 250.000 Nm).
Efficient
High efficiency escalates the productivity of the application.
Hygienic
Ever-Power Helical Gear Devices have wash-down capability because of their smooth surfaces.
Robust
If required, we are able to treat Ever-Power Helical Geared Motors with nsd tupH Corrosion Security, which also withstands intense cleaning agents.
Always the right answer: Our Helical Geared Motors
No two applications will be the same. Because of this, Ever-Power materials three different drive solutions with helical equipment units. All variants can be found as flange or foot/flange mounted versions.
The all-rounder
Standard Helical Geared Motors have an array of uses and offer confirmed quality. This type of geared motor is obtainable from Ever-Power in six sizes, in two or three stage variations with torque ranges from 50 to 700 Nm. We produce the gear wheels for helical equipment units from extremely wear-resistant, case-hardened steels.
Compact power packs
Our UNICASE Helical Geared Motors have a concise design, with an extremely robust grey cast iron housing. They are equipped with especially efficient motors in order to operate as effectively as possible, also at the utmost torque of 26,000 Nm.
Find out more about our powerful UNICASE Helical Geared Motors!
Find out more
Easy maintenance: Wash-down capable helical geared motors
With the Ever-Power series we positioned a high priority on a smooth, easy to clean surface. This characteristic is especially very important to users in hygienically critical sectors such as the food or pharmaceutical industries.
With respect to the size of the gear unit, we generate Ever-Power Helical Gear Products with a die cast aluminium or grey cast iron housing. In this way you have optimum overall performance with every variant.
The aluminium housing of the Ever-Power series provides natural corrosion protection. Nevertheless we can also provide additional protection if required with the innovative nsd tupH surface area treatment. In contrast to typical paint it cannot flake off – a great advantage in harsh conditions. Read right here how Ever-Power Helical Geared Motors optimise creation at the chocolate producer Zotter in Austria.
Ever-Power design for foot and flange mounting. Gear casing machined on all sides for universal program.
Optimized gearing geometry here and in every the other models results in exceptional running smoothness. For particular environmental conditions the apparatus unit can be fitted with two shaft seals.
Technical Data
Number of sizes:18
Power Range:0,12 – 55kW
Output torque range:23 – 14,000Nm
Ratio:0.8 – 13,500
Output option:output shaft
Assembly/installation:uniblock, flange, foot
Version
Solid shaft design
Footed, flanged or feet/flange mounting designs available
Inline gear units
Characteristics
Compact, space saving design
Torsionally rigid, high strength cast iron housing
High axial and radial load bearing capacity
Quiet Operation
Application Specific Solutions
Our most selling and most economical unit, the EP equipment motor, sets new requirements for reliability and economic climate and includes unparalleled regular features. An inverter friendly style offers easy integration now and a truly future proof solution. In . or metric dimensioned result shafts are standard providing for easy integration into all your applications. The EP equipment motor offers total versatility in mounting choices includes foot, base, face, and flange solutions. The electric motor terminal box can be mounted in alternative positions rotated in 90° steps around the electric motor frame providing for unparalleled integration options.
EP gear motors adhere to North American and International specifications, including NEMA, IEC, CSA, & CE, the EP series permits worldwide acceptance, a genuine total remedy for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is dirt tight and hose evidence, and can be used outside or in wet and dusty environments without the utilization of additional enclosures. Full rated output is available at the result shaft of the unit.
Product Features
Torque 20 … 18.500 Nm
Output Speeds 0,3 … 450 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Helical geared motors web store
On this page of our geared motors online store, you will find a huge collection of gearbox units. This consists of worm gearboxes, spur gearboxes, bevel gearboxes, flat gearboxes and planetary gearboxes in a variety of designs and speeds expressed in revolutions per minute (rpm, rev/min, min1). They are available in common sizes, installation positions, levels of protection and designs. Available engine powers range from 0.12 kW through 0.18 kW, 0.25 kW, 0.55 kW, 0.75 kW, 1.1 kW, 1.5 kW, 2.2 kW, 3 kW, 4 kW, 5.5 kW, 7.5 kW, 11 kW, 15 kW, 18.5 kW, 22 kW, 30 kW, 45 kW, 55 kW, 75 kW, to 90 kW, or could be quoted on request.
Geared motors of unique design
Spur gear drives can be found in various speeds, we.e. from significantly less than 1 up to 1000 revolutions per minute (rpm, rev/min, 1/min). Spur equipment motors are generally also designed to match customer’s person requirements. With decades of encounter and our very own last assembly, we certainly are a ideal partner for businesses that need external experience in a large spectrum of issues – whether it is a geared electric motor with brake engine, a special shaft, particular supply voltage, a spur equipment engine or explosion protected style. Our focus is on superior quality, a reliable team and a price that conforms to the market.
In 6 single-stage and fourteen two-stage and three-stage sizes, the helical gearmotors by Ever-Power ensure an optimum ratio between power and space requirements.
Your advantages
High torque density
Long service life
R37 … R167 Reduced backlash option
RM series, specially created for agitating applications
The proven modular concept and our strict quality requirements allow Ever-Power to provide a diverse selection of torques and decrease ratios with incomparably finely tuned gradings. With this extraordinary diversity, Ever-Power models new standards in neuro-scientific drive engineering.
Available versions
Single-stage or multi-stage
Foot-mounted or flange-mounted
Foot-mounted and flange-mounted
Flange-mounted with prolonged bearing hub
RX series (single-stage)
For high output speeds, the exclusively single-stage equipment models RX57 to RX107 offer small solutions for your system design.
R series (two-stage and three-stage)
Our complete range of helical gearmotors provides the the best size and power solution for each drive job. And for applications where weight is an issue, our multi-stage gear devices provide something special: Because of their die-cast aluminum style, the models R07, R17 and R27 are three particularly efficient lightweights – ideal as satellite drives and for use in light machine constructions. Reduced backlash helical gear units are also available for particularly precise requirements.
RM series
RM gearmotors with extended result bearing hub are a special type of helical gearmotor. These were designed specifically for agitating applications and invite for high overhung and axial loads and bending moments. The rest of the data corresponds compared to that of regular helical gearmotors.