ep

December 26, 2019

The EP Greenhouse gearbox is a concise and lightweight reduction gear driver with a limit switch system that is suitable for assembly of a locally available electric motor. The gear motor can be used in manually-controlled or climate-controlled ventilation and screen systems in greenhouses. The quick and easy-to-install EP reducer can be rainproof and windproof. The geared motor has a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise gear driver for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is certainly locked when the reduction gear motor isn’t running. The completely sealed reduction gearbox comes with an growth chamber with a diaphragm to keep the gear essential oil at a minimal pressure under all situations, even at high temperature ranges. Thanks to the use of an growth chamber, the gear motor can be installed in any placement. There are no restrictions, because there is no need for a bleed connect. The sealed reduction reducer keeps the apparatus essential oil of the geared motor in ideal condition for its entire operating life time. The gear reducer is ideal for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction gear driver comes with an FT85 motor assembly flange, to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an included chamber and is enclosed by an impact-resistant plastic-type cover. The limit switch system is obtainable and easy to adjust. The limit change system’s optimum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).