Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive of up to approx 270 degrees for example on camera focus rings. They also offer an economical alternative where a large gear is required or a longer stretch (up to 2 metres) of linear movement is preferred. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear motion applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Gets the highest power and precision in the EVER-POWER regular rack series. Bolt holes can be remachined as carburizing can be applied just within the tooth region. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Temperature treated surface gears with high precision and power has excellent cost-performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, long life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth height and face width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and amount of the teeth. J Series products are also available.
Steel Racks w/ Machined Ends (SRF) : Low cost, large choices of modules and number of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and quantity of tooth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic-type Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks manufactured from free-slicing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal motion. S Type is easy to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where metal racks do no have this attribute. Pinions and add-ons are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded flexible racks.
Flexible Rack Guide Rails (ARL) : Instruction Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres in length. Stainless Steel and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on ask for. Moulded Hostaform Racks are available to offer a cost-effective alternative where less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Predicated on the system of a flexible rack and gear, a rotational joint actuator called vsaFGR can be proposed to modify the joint stiffness. The flexible gear rack can be regarded as a mixture of a nonlinear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness is in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with respect to the flexible equipment rack is usually perpendicular to the joint loading pressure, so the power necessary for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can provide an easy to set up rotational drive of up to approx 270 degrees for instance on camera focus bands. They also provide an economical remedy where a sizable gear is necessary or a longer stretch (up to 2 metres) of linear movement is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear motion applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest power and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is definitely applied just within the tooth region. J Series items are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : High temperature treated surface gears with high precision and power has excellent cost-performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : That is a solid rack manufactured from Chromoly steel, treated by carburizing. Has high-power, high wear resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, long life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and encounter width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of tooth. J Series items are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and quantity of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large selections of modules and amount of tooth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 material\’s rust-resistant quality.
Plastic-type Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series products are also available.
Plastic-type material Racks (PR•PRF) : Made form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal movement. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Make use of where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration because of larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Used in applications due to its flexibility, where steel racks do no possess this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guide Rails (ARL) : Instruction Rails for Molder Versatile Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) or more to 2 metres long. Stainless Steel and Delrin (Plastic-type material) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm long. Alternative materials are available on demand. Moulded Hostaform Racks are available to offer a cost-effective alternative where less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the mechanism of a flexible rack and equipment, a rotational joint actuator named vsaFGR is usually proposed to regulate the joint stiffness. The flexible gear rack could be regarded as a mixture of a non-linear elastic element and a linear adjusting system, providing advantages of compactness. The joint stiffness can be in the number of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the gear displacement, and nearly independent from the joint angular deflection, providing benefits of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with respect to the flexible equipment rack is perpendicular to the joint loading push, so the power necessary for stiffness regulating is really as low as 14.4 W, providing advantages of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.