DUMP TRAILER Electrical power UNIT- SINGLE ACTING
Standard Description
This electrical power unit has a energy up gravity down circuit. Start off the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve might be offered if demanded. Also a strain compen sated movement management may be additional for the circuit to control the descent velocity of your cylinder.
Remark: Please seek the advice of our income engineer for that different pump displacement, motor power or tank capability.
Special Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned prior to set up of 
the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and no cost of impurities.N46 hydraulic oil is proposed.
4. The electrical power unit ought to be mounted horizontally.
5. Check the oil level inside the tank following the preliminary working of the power unit.
6. Oil modifying is needed immediately after the preliminary one hundred operation hours, afterwards once each and every 3000 hrs.
DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
General Description
This power unit features a electrical power up electrical power down circuit with load holding on both A & B ports. A pressure compensatred flow handle can be additional to circuit to manage the decent speed of the cylinder.
Distinctive Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic elements concerned prior to installation of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities. N46 hydraulic oil is encouraged.
four. The electrical power unit ought to be mounted horizontally.
5. Check the oil degree inside the tank soon after the original operating on the electrical power unit.
6. Oil modifying is needed right after the initial a hundred operation hours, afterwards once every single 3000 hours.